COMP Cams

COMP Cams Pushrod 9.250in Straight 7/16

Photo - Primary
Photo - Primary
Logo Image
Logo Image
Roll over image to zoom in Click on image to zoom
Photo - PrimaryPhoto - PrimaryLogo ImageLogo Image
COMP Cams

COMP Cams Pushrod 9.250in Straight 7/16

SKU: CCA8637-1
No reviews

radius, 5/16" ball end. The radii on each end provide ...Read More

Price:
$19.99
Add To Cart
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches
Add To Wish List
190 ENTRIES 10X

Ships FAST in USA

Guaranteed Low Price

GGCRACING Discount

Product Details

Product Description
Part Numbers
Sizing & Fit

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing, which is much stronger than typical 1000 Series Steels and will better handle extreme valve train setups.Single (1) 9.250" Pushrod7/16" diameter offers additional stiffness and higher natural frequency 210˚

Catalog
User 1

Product Details

Product Description
Part Numbers
Sizing & Fit

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing, which is much stronger than typical 1000 Series Steels and will better handle extreme valve train setups.Single (1) 9.250" Pushrod7/16" diameter offers additional stiffness and higher natural frequency 210˚

Catalog
User 1

Product Details

Product Description

radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing, which is much stronger than typical 1000 Series Steels and will better handle extreme valve train setups.Single (1) 9.250" Pushrod7/16" diameter offers additional stiffness and higher natural frequency 210˚

Catalog
User 1

DRIVERS Also Bought

Recently viewed