Heatshield Products Precut for Easy Installation, Lowers IAT's, Best $$ to RWHP around
I-M Shield(TM) lowers intake combustion temperatures and create more power. These is not better dollar per RWHP power adder on the market today. Lowering intake manifold temps creates a denser fuel and air mixture, creating more power. Think of it as an intercooler for your intake, same physics, and chemistry just a different way to get there. The inner Kool Core(TM) insulation, combined with an 11 aluminum make this one heavy duty peel and stick insulator for your intake manifold. There is not an easier or faster way to make horsepower than using the IM Shield by Heatshield Products. Heavy duty adhesive will stick to any clean semi-smooth surface. Simply degrease, clean surface, then wipe with pre-paint cleaner or isopropyl alcohol, let dry then firmly press the I-M Shield onto the underside of the intake manifold. Use provided edging tape to finish the install. It works on both composite and aluminum intake manifolds for late model and classic vehicles.
This Part Fits:
| Year |
Make |
Model |
Submodel |
Notes |
| 2014 |
Chevrolet |
Camaro |
Z/28 |
|
| 2015 |
Chevrolet |
Camaro |
Z/28 |
|
| 2006 |
Chevrolet |
Corvette |
Z06 |
|
| 2007 |
Chevrolet |
Corvette |
Z06 |
|
| 2008 |
Chevrolet |
Corvette |
Z06 |
|
| 2009 |
Chevrolet |
Corvette |
Z06 |
|
| 2010 |
Chevrolet |
Corvette |
Z06 |
|
| 2011 |
Chevrolet |
Corvette |
Z06 |
|
| 2012 |
Chevrolet |
Corvette |
Z06 |
|
| 2013 |
Chevrolet |
Corvette |
Z06 |
|
Specifications:
| Description_DEF |
Engine Intake Manifold Heat Shield |
| Description_DES |
Precut for Easy Installation, Lowers IAT's, Best $$ to RWHP around |
| Description_EXT |
Stick on horsepower! I-M Shield increase horsepower buy protecting the intake manifold and reduces heat radiating up from the top motor. Lowering intake manifold temps creates a more dense fuel and air mixture, creating more power |
| Description_FAB |
Withstands 11?F radiant continuous |
| Description_FAB |
Best doller per RWHP around |
| Description_FAB |
Adhesive good for 3?F |
| Description_FAB |
Lowers intake temperatures |
| Description_INV |
I-M Shield LS7 - stock manifold |
| Description_MKT |
I-M Shield(TM) lowers intake combustion temperatures and create more power. These is not better dollar per RWHP power adder on the market today. Lowering intake manifold temps creates a denser fuel and air mixture, creating more power. Think of it as an intercooler for your intake, same physics, and chemistry just a different way to get there. The inner Kool Core(TM) insulation, combined with an 11 aluminum make this one heavy duty peel and stick insulator for your intake manifold. There is not an easier or faster way to make horsepower than using the IM Shield by Heatshield Products. Heavy duty adhesive will stick to any clean semi-smooth surface. Simply degrease, clean surface, then wipe with pre-paint cleaner or isopropyl alcohol, let dry then firmly press the I-M Shield onto the underside of the intake manifold. Use provided edging tape to finish the install. It works on both composite and aluminum intake manifolds for late model and classic vehicles. |
| Description_SHO |
Int Mnfld Heatshield |
