Standard Hobbs Switch

SKU: BMS-39559580123310

Standard Hobbs Switch Brand: Burger Motorsports Category: Sensors This simple ...Read more

Please choose: 5psi 1/8" NPT
In Stock! Ships within 24 hours
Price:
Sale price$20.00
200 ENTRIES10X
Add To Cart
Checking fitment…
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches

Product Details

Product Description
Part Numbers
Sizing & Fit

Standard Hobbs Switch

  • Brand: Burger Motorsports
  • Category: Sensors

This simple to install Hobbs switch can be used to run a secondary fuel pump or provide an additional level of WMI protection. Available in both 1/8" NPT and vacuum nipple, it's normally off (open) and will trigger at the preset of 5psi or 15psi.

The switch is rated for up to 6amps. If used as a WMI flood safety we suggest 5psi and running the solenoid ground through it so the solenoid can only open if the WMI system requests flow AND you're making at least 5psi.

For those using it to trigger a secondary fuel pump we suggest 15psi and using it to trigger a 30amp automotive relay for the pump.

What is a Hobbs switch?

Hobbs switch is just a simple on-off switch that is normally off and used to trigger an accessory at a set boost point.

How do I install a Hobbs switch?

The Hobbs switch has two contacts that need to be connected.

  • Connect one contact to chassis ground
  • Connect the other contact to your ground trigger wire for the accessory.

Standard Hobbs Switch

  • Brand: Burger Motorsports
  • Category: Sensors

This simple to install Hobbs switch can be used to run a secondary fuel pump or provide an additional level of WMI protection. Available in both 1/8" NPT and vacuum nipple, it's normally off (open) and will trigger at the preset of 5psi or 15psi.

The switch is rated for up to 6amps. If used as a WMI flood safety we suggest 5psi and running the solenoid ground through it so the solenoid can only open if the WMI system requests flow AND you're making at least 5psi.

For those using it to trigger a secondary fuel pump we suggest 15psi and using it to trigger a 30amp automotive relay for the pump.

What is a Hobbs switch?

Hobbs switch is just a simple on-off switch that is normally off and used to trigger an accessory at a set boost point.

How do I install a Hobbs switch?

The Hobbs switch has two contacts that need to be connected.

  • Connect one contact to chassis ground
  • Connect the other contact to your ground trigger wire for the accessory.

Customer reviews

No reviews yet. Bought this part? Tell other drivers how it fits and performs.

Recently viewed