Howe Ball Joint Stud 224385 +.500in Extended — 2.000 in/ft Taper Steel Stud

SKU: BJDM_224385
No reviews

Enhanced Handling with Howe Extended StudsThe Howe 224385 ball joint ...Read More

Price:
Sale price$51.99
Add To Cart
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches

Product Details

Product Description
Part Numbers
Sizing & Fit

Enhanced Handling with Howe Extended Studs

The Howe 224385 ball joint stud is designed for performance-minded builders who need a +0.5-inch extension to dial in their suspension geometry. By correcting the angle of the control arm, this stud helps minimize bump steer and improves the overall handling characteristics of your race car. Built with a 2.000 in/ft taper and a 1.437-inch ball, it offers the perfect balance of strength and adjustability.

Key Specifications

  • Taper: 2.000 in/ft
  • Extended Length: +0.5 inch
  • Overall Length: 3.65 inches
  • Ball Diameter: 1.437 inches
  • Thread Pitch: 5/8-18
  • Material: Copper-plated steel

When you lower your vehicle or modify the suspension, the factory ball joint geometry often suffers. The Howe 224385 provides the necessary correction to restore optimal suspension travel and steering response. Constructed from high-strength steel and protected with a copper-plated finish, this stud is designed to withstand the high-impact forces of track racing. It is a vital component for any serious racer looking to maximize tire grip and cornering efficiency. With Howe's reputation for quality and precision, you can trust this stud to perform under pressure. For all your high-performance suspension and steering needs, rely on the experts at GGCRACING.

Product Details

Product Description
Part Numbers
Sizing & Fit

Enhanced Handling with Howe Extended Studs

The Howe 224385 ball joint stud is designed for performance-minded builders who need a +0.5-inch extension to dial in their suspension geometry. By correcting the angle of the control arm, this stud helps minimize bump steer and improves the overall handling characteristics of your race car. Built with a 2.000 in/ft taper and a 1.437-inch ball, it offers the perfect balance of strength and adjustability.

Key Specifications

  • Taper: 2.000 in/ft
  • Extended Length: +0.5 inch
  • Overall Length: 3.65 inches
  • Ball Diameter: 1.437 inches
  • Thread Pitch: 5/8-18
  • Material: Copper-plated steel

When you lower your vehicle or modify the suspension, the factory ball joint geometry often suffers. The Howe 224385 provides the necessary correction to restore optimal suspension travel and steering response. Constructed from high-strength steel and protected with a copper-plated finish, this stud is designed to withstand the high-impact forces of track racing. It is a vital component for any serious racer looking to maximize tire grip and cornering efficiency. With Howe's reputation for quality and precision, you can trust this stud to perform under pressure. For all your high-performance suspension and steering needs, rely on the experts at GGCRACING.

Product Details

Product Description

Enhanced Handling with Howe Extended Studs

The Howe 224385 ball joint stud is designed for performance-minded builders who need a +0.5-inch extension to dial in their suspension geometry. By correcting the angle of the control arm, this stud helps minimize bump steer and improves the overall handling characteristics of your race car. Built with a 2.000 in/ft taper and a 1.437-inch ball, it offers the perfect balance of strength and adjustability.

Key Specifications

  • Taper: 2.000 in/ft
  • Extended Length: +0.5 inch
  • Overall Length: 3.65 inches
  • Ball Diameter: 1.437 inches
  • Thread Pitch: 5/8-18
  • Material: Copper-plated steel

When you lower your vehicle or modify the suspension, the factory ball joint geometry often suffers. The Howe 224385 provides the necessary correction to restore optimal suspension travel and steering response. Constructed from high-strength steel and protected with a copper-plated finish, this stud is designed to withstand the high-impact forces of track racing. It is a vital component for any serious racer looking to maximize tire grip and cornering efficiency. With Howe's reputation for quality and precision, you can trust this stud to perform under pressure. For all your high-performance suspension and steering needs, rely on the experts at GGCRACING.

DRIVERS Also Bought

Recently viewed