RockJock
Photo - Primary
User 1
Roll over image to zoom in Click on image to zoom
Photo - PrimaryUser 1
RockJock

RockJock Antirock Sway Bar Kit (36in x .1in Bar 18in Steel Arms)

SKU: ROKRJ-206006-101

RockJocks Antirock sway bar kits are available in a universal ...Read more

Price:
$738.99
7380 ENTRIES10X
Sold Out
Checking fitment…
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches

Ships FAST in USA

Guaranteed Low Price

GGCRACING Discount

Product Details

Product Description
Part Numbers
Sizing & Fit
RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 36 in. torsion bar length and 18 in. long fabricated steel arms. Vertical links use a 14 in. long 1/2 in. x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 36 in. bar is a 1 in. diameter to handle heavier loads. These kits require fabricating for installation -- these are NOT bolt-on kits.
RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 36 in. torsion bar length and 18 in. long fabricated steel arms. Vertical links use a 14 in. long 1/2 in. x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 36 in. bar is a 1 in. diameter to handle heavier loads. These kits require fabricating for installation -- these are NOT bolt-on kits.

Customer reviews

No reviews yet. Bought this part? Tell other drivers how it fits and performs.

Recently viewed