RockJock
Photo - Primary
Photo - Unmounted
Photo - Unmounted
Logo Image
Roll over image to zoom in Click on image to zoom
Photo - PrimaryPhoto - UnmountedPhoto - UnmountedLogo Image
RockJock

RockJock Johnny Joint Rod End 3in Narrow Forged 1 1/2in-12 RH Threads 3.250in x 3/4in Ball

SKU: ROKRJ-365500-102

RockJock's narrow forged Johnny Joints for fabricators and suspension system ...Read more

Price:
$134.99
1340 ENTRIES10X
Add To Cart
Checking fitment…
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches

Ships FAST in USA

Guaranteed Low Price

GGCRACING Discount

Product Details

Product Description
Part Numbers
Sizing & Fit
RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint features a narrow 3 in. diameter joint body, fitted with a zerk fitting for greasing, 3.67 in. of 1 1/2 in.-12 right hand threads on the shank, and a 3.250 in. mounting width ball with a 0.750 thru bolt hole. Finished in gold zinc plating.
RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint features a narrow 3 in. diameter joint body, fitted with a zerk fitting for greasing, 3.67 in. of 1 1/2 in.-12 right hand threads on the shank, and a 3.250 in. mounting width ball with a 0.750 thru bolt hole. Finished in gold zinc plating.

Customer reviews

No reviews yet. Bought this part? Tell other drivers how it fits and performs.

Recently viewed