TEN Factory

TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear

TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear
TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear
TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear
Roll over image to zoom in Click on image to zoom
TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 RearTEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 RearTEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear
TEN Factory

TEN Factory Performance Axle Kit 31-Spline 29.93in — Fits 1994-1998 Ford Mustang 8.8 Rear

Save 25%
SKU: FCHM_MG22185
No reviews

About TEN Factory TEN Factory engineers high-quality automotive parts and ...Read More

Price:
$431.99 $578.57
Add To Cart
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches
Add To Wish List
4310 ENTRIES 10X

Ships FAST in USA

Guaranteed Low Price

GGCRACING Discount

Product Details

Product Description
Part Numbers
Sizing & Fit

About TEN Factory

TEN Factory engineers high-quality automotive parts and accessories trusted by enthusiasts and shops across North America. At GGCRACING we stock the full TEN Factory lineup with fast shipping and expert fitment support — order with confidence.

High-Horsepower 31-Spline Axle Upgrade

If you have upgraded your 1994-1998 Ford Mustang with a high-horsepower engine or a 31-spline differential, this TEN Factory axle kit is a mandatory upgrade. Moving from 28-spline to 31-spline shafts significantly increases the torque capacity of your 8.8-inch rear end, preventing axle breakage during hard launches at the drag strip.

Engineered for Maximum Strength

  • Compatibility: 1994-1998 Ford Mustang 8.8-inch rear (requires 31-spline differential)
  • Spline Count: 31-Spline for increased torque handling
  • Length: 29.93 inches
  • Bolt Pattern: 5 x 4.50 inches
  • Construction: Heavy-duty steel with black oxide finish
  • Retention: C-clip design

These performance axles are built to withstand the stresses of high-performance applications. By increasing the spline count, you distribute the load across more contact points, effectively reducing the risk of shearing. This kit is the perfect balance of durability and performance for your SN95 Mustang. Ensure your drivetrain is ready for the extra power by choosing these premium shafts from GGCRACING.

Product Details

Product Description
Part Numbers
Sizing & Fit

About TEN Factory

TEN Factory engineers high-quality automotive parts and accessories trusted by enthusiasts and shops across North America. At GGCRACING we stock the full TEN Factory lineup with fast shipping and expert fitment support — order with confidence.

High-Horsepower 31-Spline Axle Upgrade

If you have upgraded your 1994-1998 Ford Mustang with a high-horsepower engine or a 31-spline differential, this TEN Factory axle kit is a mandatory upgrade. Moving from 28-spline to 31-spline shafts significantly increases the torque capacity of your 8.8-inch rear end, preventing axle breakage during hard launches at the drag strip.

Engineered for Maximum Strength

  • Compatibility: 1994-1998 Ford Mustang 8.8-inch rear (requires 31-spline differential)
  • Spline Count: 31-Spline for increased torque handling
  • Length: 29.93 inches
  • Bolt Pattern: 5 x 4.50 inches
  • Construction: Heavy-duty steel with black oxide finish
  • Retention: C-clip design

These performance axles are built to withstand the stresses of high-performance applications. By increasing the spline count, you distribute the load across more contact points, effectively reducing the risk of shearing. This kit is the perfect balance of durability and performance for your SN95 Mustang. Ensure your drivetrain is ready for the extra power by choosing these premium shafts from GGCRACING.

Product Details

Product Description

About TEN Factory

TEN Factory engineers high-quality automotive parts and accessories trusted by enthusiasts and shops across North America. At GGCRACING we stock the full TEN Factory lineup with fast shipping and expert fitment support — order with confidence.

High-Horsepower 31-Spline Axle Upgrade

If you have upgraded your 1994-1998 Ford Mustang with a high-horsepower engine or a 31-spline differential, this TEN Factory axle kit is a mandatory upgrade. Moving from 28-spline to 31-spline shafts significantly increases the torque capacity of your 8.8-inch rear end, preventing axle breakage during hard launches at the drag strip.

Engineered for Maximum Strength

  • Compatibility: 1994-1998 Ford Mustang 8.8-inch rear (requires 31-spline differential)
  • Spline Count: 31-Spline for increased torque handling
  • Length: 29.93 inches
  • Bolt Pattern: 5 x 4.50 inches
  • Construction: Heavy-duty steel with black oxide finish
  • Retention: C-clip design

These performance axles are built to withstand the stresses of high-performance applications. By increasing the spline count, you distribute the load across more contact points, effectively reducing the risk of shearing. This kit is the perfect balance of durability and performance for your SN95 Mustang. Ensure your drivetrain is ready for the extra power by choosing these premium shafts from GGCRACING.

DRIVERS Also Bought

Recently viewed