UMI Performance 05-10 Ford Mustang Upper Control Arm Mount Stepped Spacers

SKU: UMI1058
No reviews

This spacer kit manufactured by UMI Performance is designed to ...Read More

Price:
Sale price$10.99
Add To Cart
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches

Product Details

Product Description
Part Numbers
Sizing & Fit
This spacer kit manufactured by UMI Performance is designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking!
Installation Instructions


This Part Fits:

Year Make Model Submodel
2005-2010 Ford Mustang Base
2008-2009 Ford Mustang Bullitt
2005-2010 Ford Mustang GT
2007-2008 Ford Mustang Shelby GT
2007-2010 Ford Mustang Shelby GT500
2008-2009 Ford Mustang Shelby GT500KR

Product Details

Product Description
Part Numbers
Sizing & Fit
This spacer kit manufactured by UMI Performance is designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking!
Installation Instructions


This Part Fits:

Year Make Model Submodel
2005-2010 Ford Mustang Base
2008-2009 Ford Mustang Bullitt
2005-2010 Ford Mustang GT
2007-2008 Ford Mustang Shelby GT
2007-2010 Ford Mustang Shelby GT500
2008-2009 Ford Mustang Shelby GT500KR

Product Details

Product Description
This spacer kit manufactured by UMI Performance is designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking!
Installation Instructions


This Part Fits:

Year Make Model Submodel
2005-2010 Ford Mustang Base
2008-2009 Ford Mustang Bullitt
2005-2010 Ford Mustang GT
2007-2008 Ford Mustang Shelby GT
2007-2010 Ford Mustang Shelby GT500
2008-2009 Ford Mustang Shelby GT500KR

DRIVERS Also Bought

Recently viewed