Smittybilt

Smittybilt Smittybilt XRC FRONT BUMPER W WINCH JK 2/4DOOR 76806

SKU: DSBP_76806
No reviews

Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line ...Read More

Price:
$489.99
Sold Out
×

Car Wheel Size Chart

Wheel Diameter (inches) Tire Width (mm) Aspect Ratio Rim Width (inches)
14185655.5
15195606.0
16205556.5
17215507.0
18225457.5
19235408.0
20245358.5

Note: Wheel and tire sizes vary by car make and model. Always consult your vehicle’s manufacturer for exact specifications.

How to Read Tire Size

Example: 225/45R17 means:

  • 225 = Tire width in mm
  • 45 = Aspect ratio (height as % of width)
  • R17 = Rim diameter in inches
Add To Wish List

Ships FAST in USA

Guaranteed Low Price

GGCRACING Summer Discount

Product Details

Product Description
Part Numbers
Sizing & Fit
Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.


Specifications:

17 Black
D-Ring Mount Included Yes
Drilling Reuired No
Finish Textured
Fitment Direct Fitment
Includes Receiver Hitch No
Install Difficulty Intermediate Requires some Automotive knowledge
Installation Time 2 Hours
10 Steel
30 Yes
Parking Sensors Compatible No
Position Front
Retains Factory Fod Lights No
10051 No
Thickness 3/16
Winch Compatible Yes
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR 76
Description_EXT XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_EXT Smittybilt XRC FRONT BUMPER W WINCH JK 2/4DOOR 76806
Description_MKT Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.
Description_FAB Manufactured From 3/16 Cold Roll Steel
Description_FAB 1.75" 120 Wall Over Rider And Kickers
Description_FAB Raised Corners For Better Entry And Exit Under The Most Extreme Conditions
Description_FAB Solid Mount D-Rings - Welds On The Inside And Out
Description_FAB Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
Description_FAB Built In Winch Plate To Accommodate Up To 10K Winch
Description_FAB One-Piece Welded Design
Description_FAB Two Stage Matte Black Finish Powder Coat Finish
Description_FAB 5 Year Limited Warranty
Description_DEF Bumper


This Part Fits:

Year Make Model Submodel Notes
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
2018 Jeep Wrangler

Product Details

Product Description
Part Numbers
Sizing & Fit
Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.


Specifications:

17 Black
D-Ring Mount Included Yes
Drilling Reuired No
Finish Textured
Fitment Direct Fitment
Includes Receiver Hitch No
Install Difficulty Intermediate Requires some Automotive knowledge
Installation Time 2 Hours
10 Steel
30 Yes
Parking Sensors Compatible No
Position Front
Retains Factory Fod Lights No
10051 No
Thickness 3/16
Winch Compatible Yes
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR 76
Description_EXT XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_EXT Smittybilt XRC FRONT BUMPER W WINCH JK 2/4DOOR 76806
Description_MKT Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.
Description_FAB Manufactured From 3/16 Cold Roll Steel
Description_FAB 1.75" 120 Wall Over Rider And Kickers
Description_FAB Raised Corners For Better Entry And Exit Under The Most Extreme Conditions
Description_FAB Solid Mount D-Rings - Welds On The Inside And Out
Description_FAB Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
Description_FAB Built In Winch Plate To Accommodate Up To 10K Winch
Description_FAB One-Piece Welded Design
Description_FAB Two Stage Matte Black Finish Powder Coat Finish
Description_FAB 5 Year Limited Warranty
Description_DEF Bumper


This Part Fits:

Year Make Model Submodel Notes
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
2018 Jeep Wrangler

Product Details

Product Description
Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.


Specifications:

17 Black
D-Ring Mount Included Yes
Drilling Reuired No
Finish Textured
Fitment Direct Fitment
Includes Receiver Hitch No
Install Difficulty Intermediate Requires some Automotive knowledge
Installation Time 2 Hours
10 Steel
30 Yes
Parking Sensors Compatible No
Position Front
Retains Factory Fod Lights No
10051 No
Thickness 3/16
Winch Compatible Yes
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_INV XRC FRONT BUMPER W WINCH JK 2/4DOOR 76
Description_EXT XRC FRONT BUMPER W WINCH JK 2/4DOOR
Description_EXT Smittybilt XRC FRONT BUMPER W WINCH JK 2/4DOOR 76806
Description_MKT Like All Smittybilt Jeep Parts, The Smittybilt XRC Bumper Line Was Engineered To Provide Maximum Clearance For Rock Crawling. Each Bumper Has High Degree Approach Angles And Raised Corners To Maximize Ground Clearance, With 3/16" Cold Rolled Steel Bars Robotically Welded To The Exact Specifications. A Two Stage Textured Matte Black Powder Coat Is Then Applied For The Ultimate Look. The Front Stinger Is Manufactured From 1.75" Tubing And Has 2 Light Tabs That Could Accommodate Up To Two 9" Lights. Its Unique Design Is Capable Of Mounting Up To 10,000 Lb Winch With The Option Of Running An Aluminum Or Roller Fairlead. Each Bumper Was Developed To Be A Complete Bolt On And Requires No Modifications To Your Vehicle.
Description_FAB Manufactured From 3/16 Cold Roll Steel
Description_FAB 1.75" 120 Wall Over Rider And Kickers
Description_FAB Raised Corners For Better Entry And Exit Under The Most Extreme Conditions
Description_FAB Solid Mount D-Rings - Welds On The Inside And Out
Description_FAB Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
Description_FAB Built In Winch Plate To Accommodate Up To 10K Winch
Description_FAB One-Piece Welded Design
Description_FAB Two Stage Matte Black Finish Powder Coat Finish
Description_FAB 5 Year Limited Warranty
Description_DEF Bumper


This Part Fits:

Year Make Model Submodel Notes
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
2018 Jeep Wrangler

DRIVERS Also Bought

Recently viewed